News Releases

Highlights include 58.3m at 3.88g/t PGM+Au, 0.12% Ni including 15m at 6.41g/t PGM+Au, 0.11% Ni,
and 45.7m at 3.60g/t PGM+Au, 0.08% Ni including 13.7m at 8.47g/t PGM+Au, 0.13% Ni

VANCOUVER, March 13, 2024 – Bravo Mining Corp. (TSX.V: BRVO, OTCQX: BRVMF), (“Bravo” or the “Company”) announced that it has received assay results from eight diamond drill holes (“DDH”), five from the North Sector and three from the Southwest Sector at its 100% owned Luanga palladium + platinum + rhodium + gold + nickel project (“Luanga” or “Luanga PGM+Au+Ni Project”), located in the Carajás Mineral Province, state of Pará, Brazil.

“Drilling in the North Sector continues to be encouraging, with wider and higher-grade PGM+Au+Ni mineralization at shallow depths. DDH24LU235 is now the best drill hole intercept to date at Luanga and starts at only 10.5m from surface. In comparison, the Central Sector, which currently contains the largest proportion of Mineral Resource Estimate (“MRE”) tonnage at Luanga, has been extended to depths in excess of 400m, suggesting considerable room for further extensions to depth in the North Sector,” said Luis Azevedo, Chairman and CEO of Bravo. “We also continue to see some evidence of copper sulphide mineralization at depth in the North, as seen in drill hole DDH24LU235, suggesting potential for different styles of mineralization at Luanga.”

Highlights Include:

  • Drilling in the North Sector continues to improve in grade and thickness compared to previously reported drilling and/or drilling on adjacent drill sections as seen in DDH24LU235 on Section 1:
    • 58.3m at 3.88g/t PGM+Au, 0.12% Ni including 15m at 6.41g/t PGM+Au, 0.11% Ni
    • 45.7m at 3.60g/t PGM+Au, 0.08% Ni including 13.7m at 8.47g/t PGM+Au, 0.13% Ni
  • Shallow mineralization in the North Sector (Sections 1 and 2) is currently being defined at depths of +/-100m and remains open down dip.
  • The North Sector has significant potential below 100m from surface, given that the Central Sector extends to depths of more than 400m, which also supports a significant opportunity for MRE growth at shallower depths.
  • Bore-hole Electromagnetic (“EM”) survey team working in parallel with exploration drilling over the priority HeliTEM (airborne electromagnetics) targets, with multiple off-hole conductors ready to be modelled.

HOLE-ID

From

To

Thickness (m)

Pd

Pt

Rh

Au

PGM + Au

Ni* (%) Sulphide

Cu (%) Sulphide

TYPE

(m)

(m)

(g/t)

(g/t)

(g/t)

(g/t)

(g/t)

DDH23LU222

41.80

43.32

1.52

0.02

<0.01

<0.01

<0.01

0.02

0.88

 

FR

DDH24LU233

46.50

56.80

10.30

1.30

0.78

0.18

0.02

2.28

0.13

 

FR

DDH24LU234

54.40

92.40

38.00

0.98

0.63

0.12

0.06

1.79

0.06

 

FR

DDH24LU235

10.50

20.50

10.00

2.32

0.86

0.14

0.04

3.36

NA

 

Ox

And

21.50

79.80

58.30

2.18

1.41

0.25

0.04

3.88

0.12

 

FR

Including

49.80

64.80

15.00

3.74

2.23

0.37

0.07

6.41

0.11

 

FR

And

93.80

139.50

45.70

2.10

1.20

0.26

0.05

3.60

0.08

 

FR

Including

102.85

116.50

13.65

5.13

2.67

0.56

0.11

8.47

0.13

 

FR

And

236.30

239.30

3.00

0.00

0.00

0.00

0.03

0.04

0.01

1.01

FR

Notes:

All ‘From’, ‘To’ depths, and ‘Thicknesses’ are downhole. ‘NA’ Not applicable for Oxide material.
Given orientation of drilling and mineralization, intercepts are estimated at 125% to 140% of true thickness.
Type: Ox = Oxide. FR = Fresh Rock. Recovery methods and results will differ based on the type of mineralization.
* Bravo’s nickel grades are sulphide nickel, and do not include non-recoverable silicate nickel, unlike historical total nickel assays.

Luanga Drilling Update

Results from eight diamond drill holes have been received from the North and Southwest Sectors. All the drill holes herein reported are angled holes (-60 degrees), towards a 090° azimuth in the North and 360° azimuth in the Southwest. Together, this set of drill holes comprise a total of 1,865 metres of diamond drilling.

Section 1 (Figure 1) in the North Sector shows a new infill drill section with DDH24LU235 being the deepest drill hole on the section, clearly showing significantly better mineralization at depth, both in thickness and grade, in all three distinct zones of mineralization. Two of the mineralised zones now contain significant high-grade portions within the broader mineralised zones. This high-grade mineralization is still only defined to approximately 120m below surface, with additional drilling now planned to test for potential extension at depth. Results bode well for future MRE growth.

  • 58.3m at 3.88g/t PGM+Au, 0.12% Ni, including 15m at 6.41g/t PGM+Au, 0.11% Ni
  • 45.7m at 3.60g/t PGM+Au, 0.08% Ni, including 13.7m at 8.47g/t PGM+Au, 0.13% Ni

Figure 1: North Sector (Section 1 on Figure 3). PGM+Au mineralization significantly wider and higher-grade at depth.

Section 2 (Figure 2) in the North Sector also shows evidence of increasing widths and grades at shallow depths, with mineralization still open at depth. DDH24LU234 (38.0m at 1.79g/t PGM+Au, 0.06% Ni) is a significant improvement over the up-dip intercept in DDH24LU232 (9.8m at 0.86g/t PGM+Au) and, as with Section 1, these results also bode well for future MRE growth, with significant potential open at depth.

Figure 2: North Sector (Section 2 on Figure 3). Widths and grades improve significantly as mineralization transitions to fresh rock.

Drill Results Status Update

A total of 269 drill holes have been completed by Bravo to date, for 57,648.45 metres, including 8 metallurgical holes (not subject to routine assaying). Results have been reported for 235 Bravo drill holes to date. Assay results for 26 Bravo drill holes that have been completed are currently outstanding (excluding the metallurgical holes).

Complete Table of Recent Intercepts

HOLE-ID

From

To

Thickness (m)

Pd

Pt

Rh

Au

PGM + Au

Ni* (%) Sulphide

Cu (%) Sulphide

TYPE

(m)

(m)

(g/t)

(g/t)

(g/t)

(g/t)

(g/t)

DDH23LU220

No significant results

DDH23LU222

41.80

43.32

1.52

0.02

<0.01

<0.01

<0.01

0.02

0.88

 

FR

And

226.00

238.00

12.00

0.79

0.31

0.05

0.02

1.16

0.13

 

FR

DDH23LU225

212.35

221.35

9.00

0.62

0.24

0.03

0.01

0.91

0.07

 

FR

DDH23LU231

9.00

44.90

35.90

0.65

0.32

0.05

0.02

1.03

NA

 

Ox

And

53.75

60.00

6.25

0.76

0.38

0.07

0.07

1.27

0.25

 

FR

And

65.00

76.00

11.00

0.67

0.39

0.07

0.01

1.13

0.17

 

FR

DDH23LU232

0.00

3.00

3.00

0.59

0.29

0.05

0.01

0.93

NA

 

Ox

And

8.00

11.00

3.00

0.54

0.26

0.04

0.02

0.86

NA

 

Ox

And

24.05

31.80

9.75

0.53

0.27

0.04

0.02

0.86

0.13

 

FR

And

92.80

118.80

26.00

0.83

0.39

0.07

0.10

1.39

0.13

 

FR

DDH24LU233

0.00

15.90

15.90

0.79

0.34

0.06

0.02

1.21

NA

 

Ox

And

27.90

38.90

11.00

0.82

0.29

0.07

0.02

1.19

0.03

 

FR

And

46.50

56.80

10.30

1.30

0.78

0.18

0.02

2.28

0.13

 

FR

And

91.80

109.40

17.60

0.39

0.15

0.02

0.02

0.58

0.17

 

FR

And

168.75

171.90

3.15

0.65

0.28

0.05

0.04

1.02

0.09

 

FR

DDH24LU234

0.00

5.20

5.20

0.77

0.24

0.04

0.03

1.08

NA

 

Ox

And

54.40

92.40

38.00

0.98

0.63

0.12

0.06

1.79

0.06

 

FR

DDH24LU235

10.50

20.50

10.00

2.32

0.86

0.14

0.04

3.36

NA

 

Ox

And

21.50

79.80

58.30

2.18

1.41

0.25

0.04

3.88

0.12

 

FR

Including

49.80

64.80

15.00

3.74

2.23

0.37

0.07

6.41

0.11

 

FR

And

93.80

139.50

45.70

2.10

1.20

0.26

0.05

3.60

0.08

 

FR

Including

102.85

116.50

13.65

5.13

2.67

0.56

0.11

8.47

0.13

 

FR

And

149.10

191.20

42.10

0.53

0.22

0.03

0.04

0.82

0.04

 

FR

And

236.30

239.30

3.00

0.00

0.00

0.00

0.03

0.04

0.01

1.01

FR

Notes:

All ‘From’, ‘To’ depths, and ‘Thicknesses’ are downhole. ‘NA’ Not applicable for Oxide material.
Given orientation of drilling and mineralization, intercepts are estimated at 125% to 140% of true thickness.
Type: Ox = Oxide. FR = Fresh Rock. Recovery methods and results will differ based on the type of mineralization.
* Bravo’s nickel grades are sulphide nickel, and do not include non-recoverable silicate nickel, unlike historical total nickel assays

Figure 3: Location of Bravo Drilling and Sections Reported in this News Release

About Bravo Mining Corp.

Bravo is a Canadian and Brazil-based mineral exploration and development company focused on advancing its Luanga PGM+Au+Ni Project in the world-class Carajás Mineral Province of Brazil.

The Luanga Project is situated on mature freehold farming land and benefits from being in a location close to operating mines and a mining-experienced workforce, with excellent access and proximity to existing infrastructure, including road, rail, and clean renewable hydro grid power. A fully funded 63,000m infill, step out and exploration drilling and trenching program is well advanced for 2024. Bravo’s current Environmental, Social and Governance activities includes planting more than 18,000 high-value trees in the project area, hiring and contracting locally, and ensuring protection of the environment during its exploration activities.

Technical Disclosure

Technical information in this news release has been reviewed and approved by Simon Mottram, F.AusIMM (Fellow Australia Institute of Mining and Metallurgy), President of Bravo Mining Corp. who serves as the Company’s “qualified person” as defined in National Instrument 43-101 Standards of Disclosure for Mineral Projects (“NI 43-101”). Mr. Mottram has verified the technical data and opinions contained in this news release.

For further information about Bravo, please visit www.bravomining.com or contact:

Alex Penha
EVP Corporate Development
info@bravomining.com

Forward Looking Statements

This news release contains forward-looking information which is not comprised of historical facts. Forward-looking information is characterized by words such as “best”, “better”, “encouraging”, “wider”, “higher-grade”, “considerable”, “extension”, “potential”, “significant”, “opportunity”, “priority”, “bodes well”, variants of these words and other similar words, phrases, or statements that certain events or conditions “may” or “will” occur. This news release contains forward-looking information pertaining to the Company’s ongoing drill program and the results thereof; comparisons to historical and prior Bravo drilling; the potential for extensions to mineralization at depth; the potential for greater thicknesses and/or higher grades at depth and the implications of higher copper grades in certain areas; and the Company’s plans in respect thereof. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, and opportunities to differ materially from those expressed or implied by such forward-looking information. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, unexpected results from exploration programs, changes in the state of equity and debt markets, fluctuations in commodity prices, delays in obtaining required regulatory or governmental approvals, environmental risks, limitations on insurance coverage; and other risks and uncertainties involved in the mineral exploration and development industry. Forward-looking information in this news release is based on the opinions and assumptions of management considered reasonable as of the date hereof, including, but not limited to, the assumption that the assay results confirm that the interpreted mineralization contains significant values of nickel, PGMs and Au; that the mineralization remains open to depth, that PGM and/or Ni grades and mineralized thicknesses are improving to depth; that final drill and assay results will be in line with management’s expectations; that activities will not be adversely disrupted or impeded by regulatory, political, community, economic, environmental and/or healthy and safety risks; that the Luanga Project will not be materially affected by potential supply chain disruptions; and general business and economic conditions will not change in a materially adverse manner. Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information. The Company disclaims any intention or obligation to update or revise any forward-looking information, other than as required by applicable securities laws.

Schedule 1: Drill Hole Collar Details

HOLE-ID

Company

East (m)

North (m)

RL (m)

Datum

Depth (m)

Azimuth

Dip

Sector

DDH23LU220

Bravo

657800.01

9339871.28

221.471

SIRGAS2000_UTM_22S

200.05

360.00

-60.00

Southwest

DDH23LU222

Bravo

657000.42

9339411.47

243.035

SIRGAS2000_UTM_22S

340.35

360.00

-60.00

Southwest

DDH23LU225

Bravo

656849.98

9339305.59

232.687

SIRGAS2000_UTM_22S

356.60

360.00

-60.00

Southwest

DDH24LU231

Bravo

659505.03

9343323.01

259.557

SIRGAS2000_UTM_22S

150.65

90.00

-60.00

North

DDH24LU232

Bravo

659517.04

9343422.99

240.554

SIRGAS2000_UTM_22S

160.55

90.00

-60.00

North

DDH24LU233

Bravo

659457.20

9343323.05

260.188

SIRGAS2000_UTM_22S

223.20

90.00

-60.00

North

DDH24LU234

Bravo

659464.78

9343422.96

243.986

SIRGAS2000_UTM_22S

180.40

90.00

-60.00

North

DDH24LU235

Bravo

659401.00

9343322.99

254.545

SIRGAS2000_UTM_22S

253.60

90.00

-60.00

North

Schedule 2: Assay Methodologies and QAQC

Samples follow a chain of custody between collection, processing, and delivery to the SGS Geosol laboratory in Parauapebas, state of Pará, Brazil. The drill core is delivered to the core shack at Bravo’s Luanga site facilities and processed by geologists who insert certified reference materials, blanks, and duplicates into the sampling sequence. Drill core is half cut and placed in secured polyurethane bags, then in security-sealed sacks before being delivered directly from the Luanga site facilities to the Parauapebas SGS Geosol laboratory by Bravo staff. Additional information about the methodology can be found on the SGS Geosol website (SGS) in their analytical guides. Information regarding preparation and analysis of historic drill core is also presented in the table below, where the information is known.

Quality Assurance and Quality Control (“QAQC”) is maintained internally at the lab through rigorous use of internal certified reference materials, blanks, and duplicates. An additional QAQC program is administered by Bravo using certified reference materials, duplicate samples and blank samples that are blindly inserted into the sample batch. If a QAQC sample returns an unacceptable value an investigation into the results is triggered and when deemed necessary, the samples that were tested in the batch with the failed QAQC sample are re-tested.

Bravo SGS Geosol

Preparation

Method

Method

Method

Method

For All Elements

Pt, Pd, Au

Rh

Sulphide Ni, Cu

Trace Elements

PRPCLI (85% at 200#)

FAI515

FAI30V

AA04B

ICP40B